|
The guy who developed these bushings for his v6 gen6 put the whole story on this fourm . Google it. He tells how he installed them from the bottom.He did the r&d and got someone to make and sell them. They are 2 little alloy bushings that replace the hybrid alloy rubber factory bushings. I got mine a few weeks ago , $100 , have not put on yet. I have 1.3 neg camber front and .9 rear. My attempt to get a little oversteer balance. I have about 21k miles on my tires with this setup almost at wear bars. I rotate about every 5k miles.I will not go more neg camber than I have now. The factory camber is .5 neg camber for v6 and.75 for ss. My wear is a little more on the inside.
|