|
Cam selection
Really tryin to see which way to go with my cam selection 2022 camaro SS 1LE A10. The car is a daily driver no track fun spirited driving is all. Stop light fun and such not needing to be the fastest by any means or id go forced induction
Current mods
MSD intake manny
Katech 103mm tb
Rotofab intake
Kooks 1 7/8 headers high flow cats
Taylor custom wires
Npp exhaust
Dyno tuned.
I want it to have good low end with great mid and awesome top end. Mostly lookin for more top end. I dont wanna change my stall either. I have decided on btr springs, titanium springs, Katech c5r chain, lmr chain guide, btr push rods, johnson lifters, dod delete, and the 3 cams i have been torn between been thinking bout the katech oil pump too dont know if the newer cars suffer from the oil pump failure some of the earlier models did. Anyway cams ive been eyeballing thought it would be cool to keep the vvt an use it
Katech torquer
Btr 220
Btr 225 (but thats probably limit for stock stall)
I dont see a real return on 2500-3000 for ported heads maybe 15 to 20 rwhp over the stock. An the cams im looking at dont really have lifts big enough to make much use of them. Correct me if im wrong, anyone see a fault in my plans an have some advice im open to suggestions especially from those that have done either of these cams. Dont wanna beat up the valve seats or break a valve and i k ow btr n katech are designing using spintron to avoid this issue.
|