CAMARO6 - View Single Post - Too High Psi

cjperformance · 04-19-2023, 06:40 PM

It was a Gates. WAS....

I might need to go smaller. After some looking theres quite a bit of tension difference in a small amount of movement on that tension arm.

Belt is pretty warped. Thinking that has to be caused by slip and overheating. Might try smaller belt, and maybe one of the Gates green belts. Supposed to be better gripping.

After it warped from heat, guessing thats when it threw off.

04-19-2023, 06:40 PM	#199
cjperformance Drives: 2017 Camaro SS 50th Anniversary Join Date: Apr 2021 Location: Missouri Posts: 950	It was a Gates. WAS.... I might need to go smaller. After some looking theres quite a bit of tension difference in a small amount of movement on that tension arm. Belt is pretty warped. Thinking that has to be caused by slip and overheating. Might try smaller belt, and maybe one of the Gates green belts. Supposed to be better gripping. After it warped from heat, guessing thats when it threw off. Attached Images __________________ 2017 50th Anniversary Edition \| P1X Stage 2 DSX Aux Low Side \| LT4 high side \| Flex Fuel TooHighPsi Port Injection (installed & tuning) CircleD 3K Stall \| QA1 CF Driveshaft Forgestar F14 Drag 17x10 NT555R2 305/45/17 Rear Forgestar F14 18x8 NT555G2 235/50/18 Front 10.84@131 w/4.13" pulley ??.??@??? w/3.7" pulley (installed & tuning)