Quote:
Originally Posted by german tarquini
which parts to use forged for a horsepower of 700 or 730 in the wheel
my car already has lt4 fuel system,jms,ecs supercharger with 6.4psi at 5500rpm and 9.5 at 6400..93 fuel
with a power between 590 to 620 depending on temperatures... afr from 11.9 to 12 approximately.
with pistons only enough? If not, what set of connecting rods and pistons do you recommend, without having to balance, make it a replacement with OEM measurements
gpi have no pistons available for 2-3 months
thank you
|
The GPI drop-in kit rocks but sounds like availability is an issue these days. You may want to bite the bullet and just get in line for the GPI kit. Not sure who else makes a drop-in kit? If you’re staying in 93 fuel then make sure you drop the compression.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)
|