CAMARO6 - View Single Post

Lt4zl1 · 04-07-2023, 11:05 AM

A little teaser as owner has no account here yet. Bolt on 19 zl1 1le m6 e50 meth 9.55 lower stock upper jokerz blower headers and some cooling. I’m pretty sure a 1.43 60 foot is by far the best m6 60 foot as rivals many a10 cars so far. Yes stock ecm this is my no bog launch tune I do on my manual cars. He unfortunately missed a shift as can see on the 9.68 mph being way down at 138 and the 9.8 is 144 but car had gotten hot at that point and spun a little that time on launch so only 1.51. It’s a new day for manual cars that like to drag race as I have figured out how to make these cars launch now. I have a 2650 car that’s gonna go 8s next so will be the two fastest m6 cars around. You m6 guys have something to look forward to now if drag race.

04-07-2023, 11:05 AM	#2347
Lt4zl1 Drives: 2017 zl1 camaro Join Date: Feb 2019 Location: Florida Posts: 52	A little teaser as owner has no account here yet. Bolt on 19 zl1 1le m6 e50 meth 9.55 lower stock upper jokerz blower headers and some cooling. I’m pretty sure a 1.43 60 foot is by far the best m6 60 foot as rivals many a10 cars so far. Yes stock ecm this is my no bog launch tune I do on my manual cars. He unfortunately missed a shift as can see on the 9.68 mph being way down at 138 and the 9.8 is 144 but car had gotten hot at that point and spun a little that time on launch so only 1.51. It’s a new day for manual cars that like to drag race as I have figured out how to make these cars launch now. I have a 2650 car that’s gonna go 8s next so will be the two fastest m6 cars around. You m6 guys have something to look forward to now if drag race. Attached Images __________________ 9.52@143 first bolt on only car to reach 9.50s. First zl1 in the 9s on stock unported blower. Sbe LME heads gptuning cam typical mods jokerz prototype port blower 9.30@150 best so far work in progress. 4.70 60-130 at 3800da now in Tennessee.