CAMARO6 - View Single Post - Whats everyones thoughts on VVT or delete??

CJZ-SS1LE · 04-06-2023, 11:19 AM

So im at a cross roads of sorts i am looking at 3 different camshaftsfor my 2022 1LE and for the time being probably going to do just the cam and a set of ported built heads. This is daily driver with A10 stock stall just looking to eliminate the afm/dod so while in there new cam and heads. But the 3 cams im looking at are

BTR 225 which retains the VVT
Terminator cam from Jannetty which eliminates it
Pray stage 3 NA (eliminates vvt) but also 3-4 weeks out on cam

Like i said i have fbo MSD intake/95mm tb, kooks 17/8 headers, high flow cats, exhaust, rotofab cai, and it made 468 whp on pump. Would like to see 530-550 rwhp with most of it in the top end id like to keep it close to where it is now down low with great mid and top end.

Also while were at it whats the concensus on lifters?? I hear great things bout the LS7s from the likes of RPM motorsports, Jannety, Katech and other reputable shops which use them with no issues. Then i hear they are bad and frankly while i would love to do Johnsons their very pricey. I hear good things bout Morels too. Whats most using an your experience?

04-06-2023, 11:19 AM	#1
CJZ-SS1LE Drives: 2022 camaro SS 1LE Join Date: Jan 2023 Location: Utah Posts: 133	Whats everyones thoughts on VVT or delete?? So im at a cross roads of sorts i am looking at 3 different camshaftsfor my 2022 1LE and for the time being probably going to do just the cam and a set of ported built heads. This is daily driver with A10 stock stall just looking to eliminate the afm/dod so while in there new cam and heads. But the 3 cams im looking at are BTR 225 which retains the VVT Terminator cam from Jannetty which eliminates it Pray stage 3 NA (eliminates vvt) but also 3-4 weeks out on cam Like i said i have fbo MSD intake/95mm tb, kooks 17/8 headers, high flow cats, exhaust, rotofab cai, and it made 468 whp on pump. Would like to see 530-550 rwhp with most of it in the top end id like to keep it close to where it is now down low with great mid and top end. Also while were at it whats the concensus on lifters?? I hear great things bout the LS7s from the likes of RPM motorsports, Jannety, Katech and other reputable shops which use them with no issues. Then i hear they are bad and frankly while i would love to do Johnsons their very pricey. I hear good things bout Morels too. Whats most using an your experience?