Quote:
Originally Posted by Alpha1BC
The torque spec for the Brembo caliper bleed valves on all of these cars is 13-15 ft-lbs. (17-20 Nm). If you're not tracking the car or otherwise frequently changing brake fluid that should be fine, but subjectively it feels like quite a bit to be doing if you're changing fluid every year or more frequently. I recently switched to using only about 10-11 ft-lb and haven't seen an issue for doing 1-2 fluid changes a year.
|
Thanks for this, i was going to be looking for the values next. i might also try a little lighter and see if it seals. i do change fluid twice a year (or more) as well...