Quote:
Originally Posted by getchapull
So did you relocate your drivers side wiring harness? Do the 315s rub at all during hard accelerations?
|
I doubt the harness has been relocated- I bought the car from a dealer used lot and it had these tires on it (tires were quite new at the time). I haven't looked to see if the harness has been relo'd or not. I should probably pull the wheel off this weekend and see if there's any rubbing for peace of mind (and relocate the harness while I'm at it if it hasn't been done already).
There has been no rubbing that I've noticed, from digs up through the top of 3rd.
At stock power levels with the stock alignment, I think this tire would be fine for most people's use. Any of the other tires would hook better, of course. Again (my experience only) it is fine for anything after 1st gear. Absolutely useless in first gear, though.
__________________
2017 ZL1 M6 Black | Maggie 2650 // 103TB // Big Gulp // CSP LT's & Ultra Cats // BMR MM // BC Forged KL13
Mods being installed-
oil pump, cam, ported heads, dual in-tank, Goliath and XDI, corn, etc., etc.