Quote:
Originally Posted by Sephx1
Took it to the track, clutch is definitely starting to slip. Ordered the stock clutch, pilot bearing, and actuator. Read as many clutch threads here as I could find. What other parts do I need? Does the flywheel need to be replaced or can it be resurfaced? I have the LT1/MM6 shop manual but not the LT4. Considering a subscription to the online manuals. I have done a lot of work but never replaced a clutch. Looks like 80% of the work is just getting to it.
|
I'm not sure about the replacement or resurfacing of the flywheel itself, but you probably will want to replace the flywheel bolts.
I've had the stock ones on Gen IV motors stretch and break during re-use. I can't remember if they are TTY or not? ARP may make some that are replacements for the LT's?
You won't have any trouble replacing the clutch given your history with this project. Good luck!