03-21-2023, 07:15 AM
|
#144
|
Drives: 2022 Lt1 A10
Join Date: Nov 2015
Location: clark, mo
Posts: 8,862
|
Quote:
Originally Posted by toohighpsi
They are the correct connections. Set your "Lambda Sensor Voltage - X axis from 0.5 to 4.5 volts and then interpolate X that table. Next set your "Lambda Sensor Scaling" from 0.58 to 1.23 Lambda and also interpolate X that table. Save and upload Key ON engine OFF and then start the engine to verify "Actual Lambda" value in ReFlex with your gauge display.
If they agree you're ready to turn on closed loop on and start tuning!
Mike
|
What he said. 
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
 |
|
|