Quote:
Originally Posted by Nmolina9239
Gents,
I throw the blower back on my car and took some pictures with playdough (yes I have some at home, my gf is a teacher).
I also took some measurements using a micrometer as shown. This is on my 2018 SS with the stock hood (including the felt protector underneath) as well as the cradle lowering spacers as I posted pictures of before.
Long story short, she appears to be a tight squeeze. I had spoken to Grant at TooHighPsi a while back and he mentioned that even their low profile plates are 8/10ths of an inch thick. Looks like machining the intake runners is the way to go unless I'm missing something.
Hope this helps.
-Norm
|
I approve of the color choices
__________________
2017 50th Anniversary Edition | P1X Stage 2
DSX Aux Low Side | LT4 high side | Flex Fuel
TooHighPsi Port Injection (installed & tuning)
CircleD 3K Stall | QA1 CF Driveshaft
Forgestar F14 Drag 17x10 NT555R2 305/45/17 Rear
Forgestar F14 18x8 NT555G2 235/50/18 Front
10.84@131 w/4.13" pulley
??.??@??? w/3.7" pulley (installed & tuning)