Quote:
Originally Posted by carguy55
I haven't seen any issues issues and I've ran 19" 305 square for years and now run 18" 315 square. Beside the speedometer error it also results in a little lower gear ratio. At this level with stickier tires you should be running with little to no nannies on or you can have negative effects like over heating the rear brakes.
|
I am running the 1SS, so I only have the options of on/off for the nannies. I turn off traction control, but leave the stability control on. It does heat up the rears quite a bit, but the safety margin is more important to me overall.
Have you ever run full stability control with the 18" setup and did it feel fine or was it tripping more than it would normally?
__________________
2018 Red Hot 1SS, GM lowering kit & 1LE Sway bar kit, ZL1 1LE solid rear cradle bushings, BMR sway bar end links, GM CAI w/tune, Pray ported IM, Mamo ported TB, VS Forged VS07 rims 20x11 & 20x10 w/ Michelin PS4S