View Single Post
Old 03-11-2023, 11:58 AM   #4
radz28
Petro-sexual
 
radz28's Avatar
 
Drives: Ultra-Grin
Join Date: Oct 2006
Location: Crazy Coast
Posts: 15,855
Quote:
Originally Posted by AC Promotions View Post
Thanks for the reply. So 60 lb. Injectors are just slightly bigger than a stock LSA 56lb. Units. Do you have a supplemental fuel pump and what E-content are you running?

I plan to run 93 on a street tune and probably no more than E-40(for cooling) on a road course. With a stock short block the plan is to limit the horsepower to reduce potential failure. I’d like to size the secondary injectors for a built short block but even then, no more than 850 wheel. So maybe 85 lb. Injectors at the max? Thanks for the assistance.
I am running a DSX LOW SIDE, but just installed this stuff, so I am tuning right now. I'm still trying to polish the tune for 91 right now, but expect to start E' soon.

I believe I was told these 60s were good to about 1000 WHP in my very mild set-up, so it would seem it might suit you, too, all things being equal.
__________________

'20 ZL1 Black "Fury"
A10, PDR, Exposed CF Extractor
Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs
radz28 is offline   Reply With Quote