CAMARO6 - View Single Post - Port Plates- Injector Sizing

AC Promotions · 03-10-2023, 08:40 PM

Thanks for the reply. So 60 lb. Injectors are just slightly bigger than a stock LSA 56lb. Units. Do you have a supplemental fuel pump and what E-content are you running?

I plan to run 93 on a street tune and probably no more than E-40(for cooling) on a road course. With a stock short block the plan is to limit the horsepower to reduce potential failure. I’d like to size the secondary injectors for a built short block but even then, no more than 850 wheel. So maybe 85 lb. Injectors at the max? Thanks for the assistance.

03-10-2023, 08:40 PM	#3
AC Promotions Drives: Cadillac Cts-V Wagon Join Date: Feb 2012 Location: Flower Mound, Texas Posts: 18	Thanks for the reply. So 60 lb. Injectors are just slightly bigger than a stock LSA 56lb. Units. Do you have a supplemental fuel pump and what E-content are you running? I plan to run 93 on a street tune and probably no more than E-40(for cooling) on a road course. With a stock short block the plan is to limit the horsepower to reduce potential failure. I’d like to size the secondary injectors for a built short block but even then, no more than 850 wheel. So maybe 85 lb. Injectors at the max? Thanks for the assistance.