Quote:
Originally Posted by laynlo15
Mike has mine set up at 69% DI and 31% Port and the transition occurs at about 6500 hz. Main thing is to have a smooth transition when the port comes in or it hits pretty hard if you don't, we went thru several adjustments of the Tuner Pro RT
|
Good info, so 35% prob excessive. Mike's vid recommended starting at 30%. Honestly im much more concerned with how im going to f up when i pulley down. Not so much on dialing in my current pulley.
Did you have to manually smooth, or is that done by the spreadsheet?
Also what are your DI IPW? Mine are around 5.8ms. Mike's vid recommended targeting 5.0 to 5.5 while on PI.
__________________
2017 50th Anniversary Edition | P1X Stage 2
DSX Aux Low Side | LT4 high side | Flex Fuel
TooHighPsi Port Injection (installed & tuning)
CircleD 3K Stall | QA1 CF Driveshaft
Forgestar F14 Drag 17x10 NT555R2 305/45/17 Rear
Forgestar F14 18x8 NT555G2 235/50/18 Front
10.84@131 w/4.13" pulley
??.??@??? w/3.7" pulley (installed & tuning)