Quote:
Originally Posted by TrackClub
Thank you for your kind words and yes indeed a lot of folks have contributed here! DS1.11 are a nice pad with a flat torque. I ran them on my C5Z track car for a bit, albeit with aftermarket AP brake kit. I think DTC60 would also be a good pad to try based on feedback I trust. Never had an uneven wear with stockers, but it did happen to me when testing xp10s moons ago at the Glen. Have fun and enjoy the car! And let us know what you think about the new Ferodos. Cheers!
|
Absolutely will! I would also like to try Raybestos, Carbotech & G-LOC in due time. Thought the DS1.11 followed by DTC60 would be good starting points as I test my way through the available & recommended pads.
I never had uneven wear my first two years of DE, but my belief is that as I've become a better driver (more confidence), I have also become more aggressive (less overall braking, but harder braking and carrying more speed into the braking zone). In addition to the uneven brake wear on the HP1000s, I've noticed I'm going through SC3R tires at a more rapid rate as well.
Quote:
Originally Posted by TrackClub
Just took a peek at your vid: looks like you cought them just in time!
|
If you count wear bars starting to screech on my rotors, then, yeah, it was just in time
Critical feedback on my driving is always welcome. Here's my
YouTube channel