Quote:
Originally Posted by Osbornsm
IWhat colors available now. I see extra shades on the main Apex site but not listed for the VS-5RS.
|
The best way to know what colors are available is to go to each product page and the finishes will be displayed there for that particular wheel. You are correct that not all wheels are available in all of the finishes we offer. This is due to a few factors including, mostly market demand.
Quote:
Originally Posted by SpecialPurpose_1LE
Are there any plans to come out with an SS 1LE specific fitment for the 20" VS-5RS, or do these specs work for that application as well? Mainly concerned about the 20x10.5 ET15 fitting up front without the wider ZLE fenders, I assume rears at 20x11.5 ET42 will be fine/the same fitment as a ZLE.
|
These will be the correct fitment for SS cars as well. The problem with going wider than 10" up front on the SS 1LE is the bulkiness of the Magride strut prevents you from going in towards it much at all, so any extra width needs to go out towards the fender.
The 20x10.5" ET15 is less aggressive than the 19x11" ET11 that many SS 1LE owners run on their car, so you will not have problems. Our fitment guide goes over everything we suggest to run that setup on the SS models. The rear 20x11.5" ET42 will fit the same on all models as you mentioned.
Once again, if anyone has an SS, SS 1LE, etc (basically not a ZL1 variant) and is local or willing to come to Pleasanton, CA, we will provide a healthy discount on a set of wheels plus all professional photos of the car. Help us help you!