Quote:
Originally Posted by R8R1LE
Picked up my ordered 1LE about a month ago. Both end pieces were installed a few milimeters to far back (not aligned with trunk spoiler). And one of them is at a horrible angle, looks like a monkey stuck it on there... Car was delivered with an extra left side one, trying to get hold of a right side. Worried I'm just going to have to come out of pocket and order teh whole spoiler kit...
|
Use a heat gun (low temp) or hair dryer to warm up the end piece and area of the sheet metal. Use a plastic pry tool with a soft microfiber rag beneath it. you can add some blue painters tape to further protect things. Gently pry to remove. You can get the same 3M double sided tape to retape for reinstallation.