Quote:
Originally Posted by Drew145022
I have enough of the key to turn with pliers. How much rotation is required is my biggest question due to that it is turning. I just don’t know if I didn’t turn enough before the break or I turned to much causing the break.
|
Trunk will pop open mechanically if you went too far, so obviously you didn't. Not surprised. I only did it once, and it was at least 1/4 turn. It took way too much torque even with the plastic key-extender to pop it (like it's a cam on the emergency cable drive). So after that I didn't bother trying again, didn't want to risk the key.