[SOCAL.M6.ZLE]

Originally Posted by 45LongColt

Hi SoCal,

Thanks for the info. Looking to order Valve Covers and Coil Packs, but I have a couple more questions.

Using the relocation kit, did it come with, or require longer bolts, since they are now traveling through the relocation bracket plus the coil packs?

As far as the wires go, how long of a plug wires did you need in order to reach the relocated Coil Packs?

My current Mighty Mouse Wild CC vents into the actual GM Oil Filler neck location, does the KaTech oil fill cap thread match that of factory, so I can screw my CC back into the same location.

Thanks again and your right, I shouldn't have stared at your pictures too long... the warning wasn't enough... LOL

Note that Katech's coil relocation kit only works with their valve covers. The bracket installs on the top side of the cover, not the face, so the bolts are stock length. As for the wire length, i did not measure, but Katech's site says custom size. I would say they are about 6" longer than stock. As far as the CC integration, the filler cap is different on the cast covers i got, so my CC is now venting below the TB, not the filler cap. Hope this helped!