|
Hi Socal,
I really like the looks of your motor and under the hood. I have a couple questions regarding your Valve covers, coil packs and wires. I'm thinking of getting the WeaponX covers, MSD Blaster Coil Packs and use my existing Red Magnacore Plug wires.
1.) Is there anything special needed to swap the Value Covers out? New Gaskets... etc
2.) Do you know if the bolts have a torque specification?
3.) Did you use a relocation kit for the coil packs? If so who's
4.) Can I reuse my current Magnacore wires or do you recommend just replacing due to maybe length differences from relocating the coil packs on top of the valve covers?
Anything else you can recommend, think of or advice on swapping them. Thanks
__________________
Big Gulp|NW103|SW Headers|UHO CATS|XPipe|Borla Atak|MM CC|Kong Ported|NSX|ATI Damper|DSX 9.45 Lower|ZPE 2.5 Upper|DM Tensioner|FW Green Belt/BTR Gen V LT4 Cam w/32% lobe/BTR VVT Lockout/Pratt & Miller Chain/BTR Pushrods,Valve Springs, Retainers, Hydraulic Lifters & Guide Plate, Trunnion Roller|Katech Valley|KaTech Valve Covers|MSD Coils|DSX E Sensor & Aux Pump|ICT Water Pump|Katech Oil Pump|Cordes & Mishimoto Expansion Tanks|P3 Gauge|LC-2 Wideband Sensor|KaTech Wires|DynoJet Tuned
|