Quote:
Originally Posted by JBones81
Oh wow, that is quite a tool for that job 
Thank you for measuring! So to be clear, if I just measure exactly 2.5in down from the bottom of the brakelight to the top of the OEM badge, I should have it in the correct location? |
Yup
You might want to mark the top of the left/right "arms" of the bowtie on the trunk lid with painter's tape, too, just to make sure it's level when you slap it on. Guess that's why the factory uses such a complicated (and adjustable) tool—they can do this placement job in about 2-3 seconds.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq
Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune
1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18