CAMARO6 - View Single Post

Andy2002a · 11-16-2022, 10:54 AM

For anyone else trying to run steel wheels here's what I did:

- 4 Camaro steelies from FB marketplace (Look on FB marketplace, mine were $100)
- 2x5mm spacer
- 2x3mm spacer
- TPMS sensors + Tool off Amazon (~$60 + $10)
245/50R18 Snow tires (225/55R18 will also work, 235/50R18 will be slightly smaller)

Mounting the wheels at the front it tight so I went with a 3mm spacer(2mm should work too but 3mm was easier to find).

without spacer:

Front struct clearance is fine:

For the rear you must run a 5mm spacer otherwise the caliper will get damaged. I've driven the car for over a month now and I haven't had any issues with rubbing.

11-16-2022, 10:54 AM	#102
Andy2002a Drives: n/a Join Date: Jul 2018 Location: Mia Posts: 64	For anyone else trying to run steel wheels here's what I did: - 4 Camaro steelies from FB marketplace (Look on FB marketplace, mine were $100) - 2x5mm spacer - 2x3mm spacer - TPMS sensors + Tool off Amazon (~$60 + $10) 245/50R18 Snow tires (225/55R18 will also work, 235/50R18 will be slightly smaller) Mounting the wheels at the front it tight so I went with a 3mm spacer(2mm should work too but 3mm was easier to find). without spacer: Front struct clearance is fine: For the rear you must run a 5mm spacer otherwise the caliper will get damaged. I've driven the car for over a month now and I haven't had any issues with rubbing.