Quote:
Originally Posted by stormtrooperSS1le
Here is what I pulled from hptuner. Assuming these are redundant based on one major issue being the wiring. I can clear these but they come back. I will check fuses tonight in trunk and engine.
|
I know when my harness was damaged, the same thing happened with the codes coming back after clearing. We found that a couple of my sensors were damaged INSIDE the connector. The damage was basically UNSEEN but it was there. On this PARTICULAR occasion my AC belt had broke and it wrapped itself around the harness around the front engine cover. Obviously the ECU was not getting the correct readings due to the circuit being OPEN.