Quote:
Originally Posted by Megahurtz
I'm swapping the stock LT4 HPFP out for an LPE big bore v2 and XDI 30% injectors. I'll be on the stock cam for now.
Is there anything I need to be aware of when swapping out? From my understanding since I'm keeping the stock cam, there is no need for a lash cap and its a simple remove and replace the pump.
Do I need to measure preload and shim accordingly or would matching the stock LT4 pump shims be ok?
Looking for info from those who have done this swap.
Thanks
|
My only 2 cent contribution to your project would be to make sure you replace the TTY supercharger bolts. Be sure to post some photos and results when finished!