Quote:
Originally Posted by Camaro1973
The SE covers are plug and play with the mm can. Oil fill is not used. Use the breather on the can , screw in Your 90 degree elbow onto the cover (I have an extender on first) run it to Dirty side of can. Clean side is split into the vacuum Line by the throttle body.
Just watch the oil fill on the can, the covers have very shitty baffling and I had tons of fresh oil entering the can. I put a 5/16 reducer inline as you don’t need a 3/8 vacuum line going into The can , it’s way too much.
|
Thank you. What about the passenger side? Could I route that to the stock oil separator?