[5th_GEN_SS]

Originally Posted by Elite Engineering

This is our E2-X Ultra can and although it is tight, it fits. You can also mount it off the driverside strut tower mount using a combo bracket:






And what your stopping:





PCV cartridge location you replace with our billet diverter valve:





Hope this helps all. The cooler the location, the better, but these are tight engine compartments. All is the same as the LT4 Z06 except the mount location. And even on the CAI box is another some have done. Them you just drill 2 holes in the box and push bolts through to the C clamp.

What bracket is this?