CAMARO6 - View Single Post - Opinions please - headers with stock cats (yes, you read that correctly)

RobZL1 · 09-23-2022, 02:55 PM

For my use, I should be good with the regular gen 2's. That would give me about a 1.7 safety factor over the highest hp I'd ever build up to.

Which is also why I thought the stock ones might be fine for my use. It's a daily driver with the occasional WOT burst and maybe once a year at the drag strip these days. I'm not running it on a road course, so it would see minimal full throttle use.

09-23-2022, 02:55 PM	#18
RobZL1 fo'shizZL1 Drives: 2017 ZL1 Join Date: Aug 2017 Location: ATL Posts: 1,849	For my use, I should be good with the regular gen 2's. That would give me about a 1.7 safety factor over the highest hp I'd ever build up to. Which is also why I thought the stock ones might be fine for my use. It's a daily driver with the occasional WOT burst and maybe once a year at the drag strip these days. I'm not running it on a road course, so it would see minimal full throttle use. __________________ 2017 ZL1 M6 Black \| Maggie 2650 // 103TB // Big Gulp // CSP LT's & Ultra Cats // BMR MM // BC Forged KL13 Mods being installed- oil pump, cam, ported heads, dual in-tank, Goliath and XDI, corn, etc., etc.