Quote:
Originally Posted by Marozl1LE
also you tell me if i make 15 psi boost i cant drive this system ??? but orginial pcv system ist closed too or not ?? same like this one but with a catch can and pcv closed to supercharger whats wrong on this system what you mean ???
Thanks for your support
|
The stock LT4 blower only runs at up to 10 psi of boost, not 15.
Also, he didn't say you could not use an EE can at 15 psi, just that he blew a rear main seal with that installed, whereas the MM can has a pressure relief valve that physically prevents this from occurring. EE does say pressure shouldn't even build let alone be high enough to blow a seal with their can, and this is where I'll stop due to no experience with these catch cans, no point in armchair quarterbacking on my part.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq
Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune
1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18