Quote:
Originally Posted by laynlo15
I could use your help. I need to know what belt your running. I'm trying to calculate what I'll need with a 98 and 15% over and the blower being about 3/4 inch taller. I can figure that out if I have something to start with and since you have a 110 and 8.86 I believe that would help me get started. Thx
|
Took this to PM, but some folks might benefit. I had to use a 88.5” belt Gates K080885HD with a 110mm upper and 8.86” lower (+10%). The 86.5” Magnuson recommended for a stock ZL1 lower was too small for the 8.86” pulley.
__________________
2019 Shock 2SS A10. 2650@10psi/LPE HPFP/XDI+30/LT4 LPFP+JMS/Soler 95mm/Rotofab, E65, CSP 2” Headers/GESI GenII Cats. MM Wild/GM SG3 suspension/1LE Brakes, Velgen VF5 Wheels/GY SC3. JRE Tuned.