Quote:
Originally Posted by laynlo15
If you're going to run a slick on the rear, you need to run a skinny up front and not a radial tire. If you run a drag radial you can run about 18 to 22 lbs at the track. Its been a while since I ran a slick on the rear but I think I ran about 14 to 16 lbs with the Hoosiers, you'll either need to screw them down or use Permatex High Tack Cement on the beads to keep them from spinning on the wheels. I use the Cement on the drag radials also.
|
So would you consider these (305/45/17 ET Street R) a slick or drag radial? And how difficult is it to use that cement that you speak of?