Quote:
Originally Posted by Joshinator99
Good call on the COT. That can have a huge impact.
|
COT is off. His pressure is dropping into the 40’s like the JMS isn’t even volting properly, or working at all or there is indeed a problem with his low side.
The behavior though from the logs looks pretty identical to mine if I was to disable my aux pump. I’m Having him try a few pulls in a higher gear, monitor the voltage from the JMS and see how the pressure is on 93 with the JMS disconnected.
Should be able to tell if it’s the JMS or the pump itself. If he had an aux, I would also Suspect a restriction in the filter from Drilling the tank. (Not the case here)
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90