CAMARO6 - View Single Post

casonm23 · 07-27-2022, 05:54 PM

Trying to install a Hot Licks Flame Kit onto my 2016 Camaro LT. The kit requires me to wire the ingintion coil through a button to cut ignition from my engine when the button is pressed. I'm having alot of trouble locating the correct fuse that corresponds to the ignition wire that I will then route through the button. I see two fuses that say Even/Odd coils. There is another fuse that says: Fuel system control module ignition. Also a couple more fuses that have ignition in the name. I'm posting here because I want to be sure on which wire pertains to the ignition to make sure I don't mess up anything with my firing order. Any help would be much appreciated.

07-27-2022, 05:54 PM	#1
casonm23 Drives: 2016 Camaro LT Join Date: Jul 2022 Location: Louisville KY Posts: 8	Flame Kit Installation Trying to install a Hot Licks Flame Kit onto my 2016 Camaro LT. The kit requires me to wire the ingintion coil through a button to cut ignition from my engine when the button is pressed. I'm having alot of trouble locating the correct fuse that corresponds to the ignition wire that I will then route through the button. I see two fuses that say Even/Odd coils. There is another fuse that says: Fuel system control module ignition. Also a couple more fuses that have ignition in the name. I'm posting here because I want to be sure on which wire pertains to the ignition to make sure I don't mess up anything with my firing order. Any help would be much appreciated.