Quote:
Originally Posted by Wintermute
I messed up and left mine installed when I remapped ECU. Immediately got P0697 and P06A3 codes, and "engine power reduced" warning message. Noticed there was no power to the throttle controller after the remap which is probably what caused the CEl..... Haven't had time to troubleshoot. Hopefully it's an easy fix.....
|
It is an easy fix, my tuner had the same issue when it was plugged in. It's a pain in the ass if you're switching between tunes to have to unplug it at the pedal, flash your tune, and than replug it in. Unplug the controller at the pedal and clear the codes, should be good to go after that. I'm almost tempted to unplug mine and leave it instead of going thru the hassle again.