Quote:
Originally Posted by chisox05
The front ACS guards do not have fixed clip locations. There are 2 holes to drill into the fender liner and rivet to after it is attached with the tape. There are also no lines on the guard to indicate where to line them up to the side skirt.
The rear guards used the existing fender liner screws so they were a perfect fit.
|
Really? It doesn't even reuse the existing clip slot in the middle that has a metal backing (and that all other mudflaps use)? That's surprising, and apologies for assuming it as obvious.
Four hundred dollars and they make you drill new holes into the body... 
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq
Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune
1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18