Quote:
Originally Posted by chisox05
Thanks for the detailed response. I will try this. How far below the ground effects should the guars hang down?
Also does anyone know what is involved with correcting the ground effects so they are flush with the front fender. Are they just bolted on maybe I can loosen them and shift it back or are they glues or double sided taped to the rocker?
|
The rock guard design itself dictates the amount of overhang, because these guards have fixed clip locations.
I wouldn't mess with the side skirts, if installed correctly, they have 20-30+ rivets or at least screws each in addition to double sided tape. Trimming or moving the tape on the back of the ACS front guards as radz28 suggested seems to be a better approach.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq
Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune
1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18