View Single Post
Old 07-14-2022, 09:04 AM   #4
FlukeSS

 
FlukeSS's Avatar
 
Drives: 2020 Camaro 2SS A10
Join Date: Jun 2018
Location: Here
Posts: 1,839
Quote:
Originally Posted by Camrochris View Post
Thanks for that reply flukeSS. My gut says they will fit too. I dont have big brakes. I just have caliper covers. I have the "Camaro by brembo" 4 pist calipers sitting in a box marked "future project". If the 18" wheels will fit them the 20x8.5 should with my whimpy brakes. (I would not have bought the car if I thought for a second that it didnt have 4 piston calipers to go with the 3.6 and the 6 speed. I was shocked to find out it didnt at least have the GM OEM J55 4 piston front brakes.
Thank you for your help.
Here's your stock wheels/offsets. The ET number is the offset



Also note this looks like a square setup stock. I'll let someone else chime in with more experience with converting from square to stagger.
__________________
2020 Camaro 2SS A10 | Rebuilt by: CBI Street Cars | 2" SE LT Headers | 3" SE X-Pipe | 3" MBRP Axle-Back | Pri & Sec Cat Deletes | Roto-Fab CAI | LT2 Ported | 95mm ZR1 TB | LSA crankshaft conversion w/modified crank gear | LS1 thrust bearing | Gen V Hinson Plug Wire Set | BTR 220 Stage I Cam | ARP Rod Bolts | Delphi Lifter set | NGK LTR6IX-11 spark plug set | DOD Delete | VVT Limiter | ECM, TCM & E85 | Retuned by: Justin L. | Dyno: 510 rwhp 472 rwtq | Best 1/4 Time: 11.639
FlukeSS is offline   Reply With Quote