Quote:
Originally Posted by SOCAL.M6.ZLE
Hey Team... I have a quote for one of JRE's terminator cams with the following specs, and wanted to see how it sounded but cant find anything on youtube, and i dont do any social media, so i cant check facebook, etc...
Does anyone else have this cam, and can share some clips of idle, and or any driving impressions or issues?
222/234 .635/.635 114LSA 112 ICL +32%
|
"222/234 .635/.635 114LSA 112 ICL +32%"
If this is the specs of his cam its ok. There is 0 overlap so much not much of a chop.
Most are in this range, mine is a 229/241 .635 116 LSA, 3 degrees of overlap. In an auto this would be about it without a stall. I am making power all the way to 7k rpm.
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90