Here is a boring 9 minute video. It was 86F outside, I started the video after car and a/c was already on. I rough wrapped my lines to see how it would fit but the wrap I got was 1” ID, was a bit small. Since then I’ve got 1 1/4 wrap and redid it all. Idle seems to be about the same, however with hood closed and driving my MAT’s are hovering right at ambient 85F ambient I was 86F MAT. After 2 60-130 pulls it didn’t even hit 100F.
Wrapping them seems to have dropped temps 5-10F lower then before.
This weekend it’s suppose to be 97F so we’ll see then.
https://youtu.be/wWcSObp6hMc
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90