CAMARO6 - View Single Post

sr71bb · 05-14-2022, 12:56 AM

After the DYNO fun was over, I installed some EOS ZL1 style side skirts. These skirts come with 15 pre-drilled holes in each skirt and some double sided tape. The DONT come with screws.

My suggestion is to NOT use the tape or screws. I used BALLON pop-rivets in the pre-drilled holes and added about 10 more per side to the existing 15 holes they pre-drilled. They are VERY sturdy if you use the pop rivets. Since you drilling 3/16th inch holes in the EXISITING rocker panels PRIOR to using your pop rivet gun you DONT have to worry about rust issues since the rivets are aluminum and you ARE NOT going thru metal.

The fit is GOOD. PICS below.

05-14-2022, 12:56 AM	#66
sr71bb Drives: 2019 Camaro Z-28 Join Date: Jul 2010 Location: Dallas Posts: 1,512	ALSO update TODAY Zl1 style side skirts EOS INSTALLED After the DYNO fun was over, I installed some EOS ZL1 style side skirts. These skirts come with 15 pre-drilled holes in each skirt and some double sided tape. The DONT come with screws. My suggestion is to NOT use the tape or screws. I used BALLON pop-rivets in the pre-drilled holes and added about 10 more per side to the existing 15 holes they pre-drilled. They are VERY sturdy if you use the pop rivets. Since you drilling 3/16th inch holes in the EXISITING rocker panels PRIOR to using your pop rivet gun you DONT have to worry about rust issues since the rivets are aluminum and you ARE NOT going thru metal. The fit is GOOD. PICS below. Attached Images __________________ __________________________________________ 2019 SS 1LE BIG NA A10 Eagles Canyon Raceway 2.7 CCW Below https://youtu.be/c9M5UHDftcA 4-15-23 at SCCA TT U1 Class MEGA Thread on THIS car: https://www.camaro6.com/forums/showthread.php?t=602092 Retired Cars BELOW: 1973 Camaro, 1969 Camaro, 1969 Camaro SS RS 2010 Camaro SS with 1000HP F1R, 2019 ZL1 1LE A10