Quote:
Originally Posted by Ninjor
That extra -1 of camber must really make a difference in poke?
I am running a 20x11 w/ 26mm spacer w/ 305 30 20 SC3 square with -2.5 front and am getting a lot of poke up front.
You must be super close on your inside strut?
|
Yes we had to grind the SHIT out of the strut bracket. -1 more camber makes a ton of difference. SInce my 18 x 11 APEX wheels had ET25 and I and using a 5MM spacer on front then my NET is ET30.
The wheel is TOO close to the strut without the spacer. There was MAYBE the thickness of a piece of paper clearance if you DO NOT use the 5MM spacer.