View Single Post
Old 03-17-2022, 09:57 AM   #5
radz28
Petro-sexual
 
radz28's Avatar
 
Drives: Ultra-Grin
Join Date: Oct 2006
Location: Crazy Coast
Posts: 15,855
Quote:
Originally Posted by LT4Greg View Post
You can go to a Auto parts store and get a small clamp that can be used to secure that elbow thingy in the stock elbow. Most dealerships won’t frown on a CAI unless you do a tune. I don’t ever plan to reinstall my stock CAI on my ZL1 because the Roto-Fab is so much better than the stock unit.
THIS.

I used a small autoparts store clamp, too, and it works fine. You COULD find those clamps and crimper on Amazon, but IMO it's overkill. I don't blame your OCD (I have it, too), so you can find what you need on Amazon, but, again - it's not completely necessary to work as it needs to.
__________________

'20 ZL1 Black "Fury"
A10, PDR, Exposed CF Extractor
Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs
radz28 is online now   Reply With Quote