Quote:
Originally Posted by cheeze9878
Not 100% sure what you're asking. So I will go with what I think.
To wire it up to the fuse box in the back all you need to do is install a fuse ( check what amps your lights will be pulling to figure out what size fuse you need) and wire into the box on the rear side if the fuse ( or you can rig it in the front side but will look crappy and cheap.) You will also need to correctly ground the lights to the body. Then depending on how they are turned on you may need a switch. ALSO Make sure you run the wire to the correct side of the fuse!!
|
So I don't have to use an add-a-fuse?
Or can I use my add-a-fuse for my wiring and run it into an empty fuse slot?