Quote:
Originally Posted by cajunzl1
Wish we did have E85 here local, but nearest station is 25 miles away.
I know the headers would help and possibly drop the boost a little, but was just looking for mild upgrade ..
If the 8.6 would truly provide a 2lb increase that would satisfy me for now...(maybe).
Its a daily driver and use 93, just didnt want to go to much further than that and risk knocking and too much additional heat. Of course it'll be tuned too.
May upgrade the heat exchangers too.
|
You would need a 9.17" to get close to 2PSI. The 8.6 isnt going to provide much.
Also, your engine is a big air pump. If your moving more air in, you must move more air out or its simply not efficient.
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90