CAMARO6 - View Single Post

5.M0NSTER · 11-02-2021, 03:27 PM

Just installed the Corbeau 4 point harness for track days in my SS 1LE. It worked out a bit better than I expected. I used the existing bolts of the seat belt buckle, and the seat belt in the back seat. Angles look ok to me, set up feels very similar to the 4pt harness I used in my previous Mustang, and BMW M2.

I ran this season with the seatbelt all the way out, then slowly in trick, and it wasn't enough. Will use this setup with a HANS III device.

11-02-2021, 03:27 PM	#1
5.M0NSTER Drives: 2018 Camaro 1SS 1LE Join Date: Jun 2021 Location: Michigan Posts: 447	Corbeau 4pt harness w/o cage Just installed the Corbeau 4 point harness for track days in my SS 1LE. It worked out a bit better than I expected. I used the existing bolts of the seat belt buckle, and the seat belt in the back seat. Angles look ok to me, set up feels very similar to the 4pt harness I used in my previous Mustang, and BMW M2. I ran this season with the seatbelt all the way out, then slowly in trick, and it wasn't enough. Will use this setup with a HANS III device. Attached Images