Quote:
Originally Posted by sspddmn
Right but he also did a whole bunch of modifications to the camera set up and wiring. In my case i would only use the fin camera (re-house it of course) and rear view video mirror for the front. Id not need it for the rear. What i dont know is if i can just plug and play by taking a 2019 rear view camera mirror, its wire harness that connects to the fin camera, and the fin camera itself. Then mount the camera somewhere in the front and just run the wire harness directly to the 2019+ rear view mirror. This way when i need to see the front i can just flip the switch on the rear view mirror. In my head it seems to work but not sure if it will. Make sense? LOL
|
Yes it will work. But you would need the Power harness as well, if you do not have already a live Mirror.
If you do not have the Live View Mirror and the camera in the back, you would need these parts:
- Live View Mirror, GM Part #: 84566425
- Live View Mirror - Back-Cover, GM Part #: 84348115
- Gen5diy Harness -
Klick on me (if you have the auto-dimmed Mirror currently you need part # 220600, if you have the manual dimming mirror then 220605
Klick on me
- 6m Fakra RG174 Cable:
Klick on me
- GM OEM Camera (all others will not work) Camera only instead buying the Shark Fin:
Klick on me
- Grommet (if needed):
Klick on me
The installation is very easy...
take look at this video:
Klick on me
I did the install on my Convertible last week (unfortunately I had to buy a 2019 Spoiler with the camera integrated and got it painted). So all the same, only the the camera location is different.
