Quote:
Originally Posted by King Bowser
Completely new to the Camaro platform and I purchased a 2018 SS 1LE and am planning to drop down to a 19", following Apex wheels fitment guide I would like to run a 305 squared and they recommend
Front 19x11 +11
Rear 19x11 +35/43
It states I may need to run a 3-5mm spacer up front for strut clearance.
I'm planning on running
Front 19x10.5 +12
Rear 19x10.5 +32
I know its gonna poke as this is aggressive for an SS car but are these offsets close enough in comparison to Apex's guide and what kind of alignment would you recommend for this car that sees mostly street but track days as well.
Thanks!  |
KING look at the first post in the thread below. The only thing DIFFERENT that I run at the track vs. those settings is I run -3.6 negative camber instead of -3.1 degrees negative camber on the FRONT. I DO RUN VORSHLAG camber plates on the front to get that much camber. Also I run SPL rear TOE rods so that I can get the -2.4 degrees REAR camber. I got roughly 20K miles on my last set of tires including about 12 track days with no uneven wear. The secret to that is ROTATION and the TOE settings (see post).
https://www.camaro6.com/forums/showthread.php?t=597446