[jones1090]

I run a set of 19" Apex wheels in ZL1 1LE specs for track use (same as the ZLE OEM backspacing, width and offset) with 305 front 325 rears on my Non-Mag ride 2020 2SS with the SG3 GM lowering suspension and have had no issues with rub anywhere front or rear after multiple track days. The fronts do have some poke, but they tuck in the fenders at the top with -2.5 to -3 of camber. I did grind a small amount off the struts as people had discussed on here, but do not think I even needed to do that as I am running camber plates so not much camber dialed in at the spindle anyway. The other thing I had seen online was concern about a harness rub on the rear which has been a non-issue for me either, maybe someone who knows more can chime in if the harness in question has been relocated on newer models?