Quote:
Originally Posted by wnta1ss
If your 3-BAR MAP sensor is the red-top GM part from the C6 ZR1 (12592525) then the tune values for it in Engine>Airflow>General are:
MAP Sensor Linear 312.50 kPa
MAP Sensor Offset -11.25 kPa
As far as mounting the breakout harness with a 1-BAR sensor on it, I just made sure that the pressure nipple was open to the atmosphere and was pointing downward.
|
Will i need to extend out any of the tables that use MAP? Dont need to do VVE since its MAF only right now. But there are other tables that use MAP.
Its pn 55567257. Basically same thing. Dsx gives same values as the one you mention. Just didnt know if there were tables to rescale or not.