[Eldi Z]

Originally Posted by LiqTenExp

Make sure to get an injector seal tool to pre-size them before insertion! Something like this: https://www.amazon.com/gp/product/B088TLZBRT The part labeled 245-4 in the picture is really all you need for new injectors.

Check here for pipe part #s: https://www.camaro6.com/forums/showp...9&postcount=17 I replaced all of LT4 injectors with a new set this year, one in Cylinder #3 was causing misfires, did the whole set.

Thanks for the Heads-up
I was surely going to replace the hard-pipes, but was not aware of this injector insertion tool How much does this tool cost? The link in AWS reads "no availability"